| Manufacturer | RCBS | |
| MFG NO | 23101 | |
| SKU | 6195238 | |
| UPC | 076683231017 |
This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it
| Specification | Value | |
|---|---|---|
| MFG NO | 23101 | |
| SKU | 6195238 | |
| UPC | 076683231017 |
| RCBS | ||
| Phone: | 763-323-2300 | |
| Email: | ||
| Website: | http://www.rcbs.com | |
| Address: |
2299 Snake River Avenue Lewiston, ID 83501 |
|
|
Lee 6.5-300 Weatherby Magnum Limited Production 3 Die Set6.5-300 Weatherby Magnum Limited Production 3 Die Set by Lee now carries the 6.5-300 Weatherby Magnum Limited Production 3 Die Set from Lee. The 6.5-300 Weatherby Magnum Limited Production 3 Die Set ... |
||||||
|
|
|||||||
|
PRICE $42.58
QTY
ADD TO CART
|
|||||||
|
Hornady Custom Grade New Dimension 2-Die Set, 22 Nosler Md: 546207The Hornady Custom Grade Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full ... |
||||||
|
|
|||||||
|
PRICE $49.99
QTY
ADD TO CART
|
|||||||
|
Hornady 2-Die Set 7mm Remington Ultra Magnum Md: 546307Custom-Grade Rifle Dies Begin as specially Selected Steel That's Hand-inspected Both Before And after It's Delivered. The Steel Is Then Heat-Treated To Ensure The Durability Needed To Provide a Lifeti... |
||||||
|
|
|||||||
|
PRICE $43.99
QTY
ADD TO CART
|
|||||||
This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it
| 0 | Total: $0.00 |
|
|