Manufacturer | RCBS | |
MFG NO | 88901 | |
SKU | 6018156 | |
UPC | 076683889010 |
Turret Press by RCBS RELOADING PRODUCTSSimple operation—no complex or automated processes. You have complete control over every reloading step. May be operated in progressive or single-stage mode. In the progressive mode and output can be increased from 50 to 200 rounds per hour. Or and if preferred and the press can be used as a single-stage press and load cases in the batch mode. Rugged and cast iron frame and toggle block and turret head. Heavy-duty construction to minimize springing. Detent on Turret Head for positive alignment. Standard 7/8â€-14 threads for most popular reloading dies and accessories. Six-Station Turret Head allows many combinations in the mounting sequence of dies and powder measure permits two or more calibers to be set up at the same time. Turret Head held in place by one bolt for quick and easy changeovers. Turret Pin Assembly (provided for turret head removal and installation) and Ball Handle Assembly may be positioned for right or left-hand use. Standard Shell Holders slip into press ram and are securely held in place by a clip spring. Primer Plugs and Sleeves are supplied for seating large and small primers. Primers are seated away from stacked primers. Safety tube included. The Primer Catcher eliminates spent primers on floor—snaps off for easy emptying. Baked epoxy finish for quick and easy cleaning and chip and fade resistant. Accessory Base Plate not included. Note: RCBS highly recommends the optional Uniflowâ„¢ Powder Measure with Case Activated Linkage Kit for use on the turret Press (sold separately)
Specification | Value | |
---|---|---|
MFG NO | 88901 | |
SKU | 6018156 | |
UPC | 076683889010 |
RCBS | ||
Phone: | 763-323-2300 | |
Email: | ||
Website: | http://www.rcbs.com | |
Address: |
2299 Snake River Avenue Lewiston, ID 83501 |
Turret Press by RCBS RELOADING PRODUCTSSimple operation—no complex or automated processes. You have complete control over every reloading step. May be operated in progressive or single-stage mode. In the progressive mode and output can be increased from 50 to 200 rounds per hour. Or and if preferred and the press can be used as a single-stage press and load cases in the batch mode. Rugged and cast iron frame and toggle block and turret head. Heavy-duty construction to minimize springing. Detent on Turret Head for positive alignment. Standard 7/8â€-14 threads for most popular reloading dies and accessories. Six-Station Turret Head allows many combinations in the mounting sequence of dies and powder measure permits two or more calibers to be set up at the same time. Turret Head held in place by one bolt for quick and easy changeovers. Turret Pin Assembly (provided for turret head removal and installation) and Ball Handle Assembly may be positioned for right or left-hand use. Standard Shell Holders slip into press ram and are securely held in place by a clip spring. Primer Plugs and Sleeves are supplied for seating large and small primers. Primers are seated away from stacked primers. Safety tube included. The Primer Catcher eliminates spent primers on floor—snaps off for easy emptying. Baked epoxy finish for quick and easy cleaning and chip and fade resistant. Accessory Base Plate not included. Note: RCBS highly recommends the optional Uniflowâ„¢ Powder Measure with Case Activated Linkage Kit for use on the turret Press (sold separately)
0 | Total: $0.00 |