Manufacturer | RCBS | |
MFG NO | 80009 | |
SKU | 5952912 | |
UPC | 076683800091 |
Alternate Pages for this Product | Stock | Price |
RCBS Rifle Bullet Lube Stick |
7 | $8.64 |
Bullet Lubricant |
3 | $11.69 |
RCBS Bullet Lubricant - Rifle |
13 | $13.05 |
RCBS Rifle Bullet Lube
This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. - Caliber: .204 Ruger - Standard 7/8-inch-14 thread
Specification | Value | |
---|---|---|
MFG NO | 80009 | |
SKU | 5952912 | |
UPC | 076683800091 |
RCBS | ||
Phone: | 763-323-2300 | |
Email: | ||
Website: | http://www.rcbs.com | |
Address: |
2299 Snake River Avenue Lewiston, ID 83501 |
|
Lee Precision Production Pot IV 110V Melter 90009Large, deep pot holds approximately 10 pounds of lead. Melt time is less than 20 minutes. |
||||||
FLAT SHIPPING!
|
|||||||
PRICE $78.25
QTY
ADD TO CART
|
|
Lee's Reloading 2 Cavity Bullet Mold .45 Caliber (.450" Diameter), 200 Grains,Lee's Reloading 2 Cavity Bullet Mold .45 Caliber (.450" Diameter), 200 Grains, |
||||||
FLAT SHIPPING!
|
|||||||
PRICE $54.24
QTY
ADD TO CART
|
|
Lee 90486 Mold Bullet 2 Piece 12 Gauge 00 Buck ShotManufacturer: Lee Mfg Number: 90486Series: 00 Buck Shot 18 |
||||||
FLAT SHIPPING!
|
|||||||
PRICE $54.94
QTY
ADD TO CART
|
RCBS Rifle Bullet Lube This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. - Caliber: .204 Ruger - Standard 7/8-inch-14 thread
Alternate Pages for this Product | Stock | Price |
RCBS Rifle Bullet Lube Stick |
7 | $8.64 |
Bullet Lubricant |
3 | $11.69 |
RCBS Bullet Lubricant - Rifle |
13 | $13.05 |
0 | Total: $0.00 |