Manufacturer | Vector Optics | |
MFG NO | SCBC-01 | |
SKU | 1025861 | |
UPC |
Universal Laser
Bore Sight
By Vector Optics
The SCBC01 Laser Boar Sight Comes With 4 Bore adapters That Will Fit Any .22
To .50 Caliber Rifle Or Handgun. The Boar Sight Goes Into The End Of The Barrel
And projects a Red Laser Beam Out From The Center Of It. This Allows For The
Accurate Bore Alignment Of Scopes, Iron Sights, Or Laser Sights On Any Handgun
Or Rifle.
Proper Setup Of SCBC01 Bore Sight
Install The Appropriate Screw Into The Right Sized Adaptor For Your Firearm.
(Longer Screw In larger Caliber. Sorter Screw For smaller Caliber)
Screw Adapter Into The Back Of The Laser Bore Sight. (As Shown Above) ü The
Adapter expands larger as You Turn It Into The Laser Bore Sight.
Adjust The Adapter For a Snug Fit Into The Barrel.
Slide Unit In Until The larger Tapered End Stops.
This Has Now Aligned It With The Center Of The Axis Of The Bore
Proper Operating Of Laser Bore Sight
Make Sure The Unit Is Pointed In a Safe Direction Before You Turn It On.
To Turn The Laser On Rotate The Switch a Half Turn In Either Direction Until You
Feel a Click And The Laser Is On.
To Turn Laser Off Rotate The Switch Another Half Turn
Batteries
The SCBC01 Laser Bore Sight operates Off Of (3) LR49 / Ag13 Batteries Witch
Already Come installed In The Unit.
You Can Expect Over 1 Hour Of Continuous Use Out Of The Batteries.
To Replace The Batteries
Turn The Switch/Battery Holder To The On Position.
Push Switch Forward (Toward The Laser End) slightly And Lift Out From Rear.
Aligning Your Sight
Note: Final Adjustments Should Be Made At The Range
For Scoped Firearms
1. If You Have The Ability To Bore Sight Your Scope at 50 – 100 yards then No
Compensation For The Offset Of The Scope And Barrel Will Be Necessary, Just
Adjust Your crosshairs To Correspond With The Laser Dot.
2. Shorter distances Such as 25 – 50 Feet Will Need To Be Compensated For By
Measuring The Approximate Distance Between The Center Of Your Barrel And The
Center Of Your Scope. Adjust Your Scope That Distance Above The Laser Dot.
For Iron Sights
Adjust The Sights To Place The Projected Laser Dot On Top Of The Front Sight
Blade. The Distance For Sighting-In Iron Sights Is Not Near as Critical, However
The greater The Distance The greater The Accuracy.
Download PDF Users
Manual Click Here!
Manufacturer: Vector Optics
Model: SCBC-01
SKU: SCBS01
Specification | Value | |
---|---|---|
MFG NO | SCBC-01 | |
SKU | 1025861 | |
UPC |
Vector Optics | ||
Phone: | 334-567-2300 | |
Email: | ||
Website: | http://www.ace-distributors.net | |
Address: |
1794 Marshell Rd Wetumpka, AL 36093 |
|
Sight-rite Laser Bore Sghtr 222/223SIGHT-RITE LASER BORE SIGHTER 222/223 |
||||||
|
|||||||
PRICE $26.95
QTY
ADD TO CART
|
|
Aimshot AR3006 Arbor Laser BoresightsThe Most Complete, Accurate, Easy And inexpensive Way To Accurately Boresight Your Weapon. By installing a Laser Diode Into a (.223 Rem. For Rifle And 9mm, 30 Cal. For Pistol) And utilizing An Assortm... |
||||||
FLAT SHIPPING!
|
|||||||
PRICE $13.31
QTY
ADD TO CART
|
|
Aimshot AR243 Arbor 243 Winchester Boresighter BrassThe Most Complete, Accurate, Easy And inexpensive Way To Accurately Bore Sight Your Weapon. By installing a Laser Diode Into a (.223 Rem. For Rifle And 9mm, 30 Cal. For Pistol) And utilizing An Assort... |
||||||
FLAT SHIPPING!
|
|||||||
PRICE $13.31
QTY
ADD TO CART
|
Universal Laser Bore Sight By Vector Optics The SCBC01 Laser Boar Sight Comes With 4 Bore adapters That Will Fit Any .22 To .50 Caliber Rifle Or Handgun. The Boar Sight Goes Into The End Of The Barrel And projects a Red Laser Beam Out From The Center Of It. This Allows For The Accurate Bore Alignment Of Scopes, Iron Sights, Or Laser Sights On Any Handgun Or Rifle. Proper Setup Of SCBC01 Bore Sight Install The Appropriate Screw Into The Right Sized Adaptor For Your Firearm. (Longer Screw In larger Caliber. Sorter Screw For smaller Caliber) Screw Adapter Into The Back Of The Laser Bore Sight. (As Shown Above) ü The Adapter expands larger as You Turn It Into The Laser Bore Sight. Adjust The Adapter For a Snug Fit Into The Barrel. Slide Unit In Until The larger Tapered End Stops. This Has Now Aligned It With The Center Of The Axis Of The Bore Proper Operating Of Laser Bore Sight Make Sure The Unit Is Pointed In a Safe Direction Before You Turn It On. To Turn The Laser On Rotate The Switch a Half Turn In Either Direction Until You Feel a Click And The Laser Is On. To Turn Laser Off Rotate The Switch Another Half Turn Batteries The SCBC01 Laser Bore Sight operates Off Of (3) LR49 / Ag13 Batteries Witch Already Come installed In The Unit. You Can Expect Over 1 Hour Of Continuous Use Out Of The Batteries. To Replace The Batteries Turn The Switch/Battery Holder To The On Position. Push Switch Forward (Toward The Laser End) slightly And Lift Out From Rear. Aligning Your Sight Note: Final Adjustments Should Be Made At The Range For Scoped Firearms 1. If You Have The Ability To Bore Sight Your Scope at 50 – 100 yards then No Compensation For The Offset Of The Scope And Barrel Will Be Necessary, Just Adjust Your crosshairs To Correspond With The Laser Dot. 2. Shorter distances Such as 25 – 50 Feet Will Need To Be Compensated For By Measuring The Approximate Distance Between The Center Of Your Barrel And The Center Of Your Scope. Adjust Your Scope That Distance Above The Laser Dot. For Iron Sights Adjust The Sights To Place The Projected Laser Dot On Top Of The Front Sight Blade. The Distance For Sighting-In Iron Sights Is Not Near as Critical, However The greater The Distance The greater The Accuracy. Download PDF Users Manual Click Here! Manufacturer: Vector Optics Model: SCBC-01 SKU: SCBS01
0 | Total: $0.00 |