Manufacturer | Berry's Manufacturing | |
MFG NO | 25894 | |
SKU | 6017357 | |
UPC | 711148258948 |
Berry's Bullets 40 Caliber .401 Diameter 180 Grain Hollow Point Double Plated Bullets 1000 Count by Berry's Manufacturing These bullets feature a .401 and 180gr hollow point full metal plated jacket. They will not foul your barrel with lead residue. The Target Hollow Point is like the flat point but the hollow point nose cuts a cleaner hole in paper. Additionally and the longer bullet gives better engagement with the rifling thus providing better stabilization. .40 COL 1.135 10mm COL 1.260 Can be loaded up to 1250FPS
Load data for our Superior Plated Bullets® can be found in any manual or on any powder manufacturer’s website.
Cast or jacketed data with the same grain weight and profile will work with our bullets.
You can use a taper or a roll crimp.
Don’t over crimp the brass after seating. This causes bullet core separation, leading to increased copper fouling and accuracy issues.
Don’t exceed the recommended maximum velocities listed. This creates bullet core separation and accuracy issues.
Specification | Value | |
---|---|---|
Caliber | .40 Caliber (10mm) Bullets | |
Diameter | .401" | |
Type | Pistol | |
Weight | 180 Grains | |
MFG NO | 25894 | |
SKU | 6017357 | |
UPC | 711148258948 |
Berry's Manufacturing | ||
Phone: | ||
Email: | sales@berrysmfg.com | |
Website: | http://www.berrysmfg.com | |
Address: |
401 North 3050 East St. George, UT 84790 |
Berry's Bullets 40 Caliber .401 Diameter 180 Grain Hollow Point Double Plated Bullets 1000 Count by Berry's Manufacturing These bullets feature a .401 and 180gr hollow point full metal plated jacket. They will not foul your barrel with lead residue. The Target Hollow Point is like the flat point but the hollow point nose cuts a cleaner hole in paper. Additionally and the longer bullet gives better engagement with the rifling thus providing better stabilization. .40 COL 1.135 10mm COL 1.260 Can be loaded up to 1250FPS Load data for our Superior Plated Bullets® can be found in any manual or on any powder manufacturer’s website. Cast or jacketed data with the same grain weight and profile will work with our bullets. You can use a taper or a roll crimp. Don’t over crimp the brass after seating. This causes bullet core separation, leading to increased copper fouling and accuracy issues. Don’t exceed the recommended maximum velocities listed. This creates bullet core separation and accuracy issues.
0 | Total: $0.00 |