Manufacturer | L.E. Wilson | |
MFG NO | CG6555 | |
SKU | 6028203 | |
UPC | 6555 |
L.E. Wilson Cartridge Case Gauge 6.5x55 Swedish Mauser Norma Technical Information: Material: Steel Precision Machining -This is a one-piece and non-adjustable cylinder-type gage for checking fired and resized cartridge cases for cone-to-head and overall length -Used to compare cartridges against the minimum SAAMI chamber dimensions Instructions: -Drop a fired case into the gage. Take a measurement on headspace. This can be done with either a depth micrometer or caliper (Depending on if the case is sitting high or low in the gage). If the case sticks out past maximum headspace the firearm probably has a larger than average chamber. The gage can still be used because it is being used to determine how much resizing is required. -Now once the initial measurement is taken and slowly dial in the full length sizer until there is a 0.001 to 0.002 drop in headspace. This will give the measurement to resize the case just below the chambers headspace in the firearm being reloaded for and giving a more accurate shot and saving brass by not causing it to be overworked. -Once the brass has been sized and set the brass in the gage and set the gage on a flat surface with the head side facing down. Now look across the top of the gage and this give the maximum and minimum for trim length.
Specification | Value | |
---|---|---|
MFG NO | CG6555 | |
SKU | 6028203 | |
UPC | 6555 |
L.E. Wilson | ||
Phone: | 509-782-1328 | |
Email: | support@lewilson.com | |
Website: | http://www.lewilson.com | |
Address: |
404 Pioneer Ave P.O. Box 324 Cashmere, WA 98815 |
|
Frankford Arsenal Quick & Easy Tumbler Kit Md: 645880The Quick-N-EZ Tumbler Is The Biggest Advancement In Case tumblIng In years. The Unique Bowl Design Increases Brass Agitation For Fast, Aggressive Cleaning That reduces Wear On Reloading Dies And Exte... |
||||||
FLAT SHIPPING!
|
|||||||
PRICE $97.76
QTY
ADD TO CART
|
|
Hornady 043320 Lock N Load Sonic Cleaner IIH 110VManufacturer: Hornady Mfg Co Model: 043320 |
||||||
FLAT SHIPPING!
|
|||||||
PRICE $146.98
QTY
ADD TO CART
|
|
Frankford Arsenal Quick-N-EZ Case Tumbler, 110V Md: 855-020The Quick-N-EZ Tumbler Is The Biggest Advancement In Case tumblIng In years. The Unique Bowl Design Increases Brass Agitation For Fast, Aggressive Cleaning That reduces Wear On Reloading Dies And Exte... |
||||||||
FLAT SHIPPING!
|
|||||||||
PRICE $55.79
QTY
ADD TO CART
|
L.E. Wilson Cartridge Case Gauge 6.5x55 Swedish Mauser Norma Technical Information: Material: Steel Precision Machining -This is a one-piece and non-adjustable cylinder-type gage for checking fired and resized cartridge cases for cone-to-head and overall length -Used to compare cartridges against the minimum SAAMI chamber dimensions Instructions: -Drop a fired case into the gage. Take a measurement on headspace. This can be done with either a depth micrometer or caliper (Depending on if the case is sitting high or low in the gage). If the case sticks out past maximum headspace the firearm probably has a larger than average chamber. The gage can still be used because it is being used to determine how much resizing is required. -Now once the initial measurement is taken and slowly dial in the full length sizer until there is a 0.001 to 0.002 drop in headspace. This will give the measurement to resize the case just below the chambers headspace in the firearm being reloaded for and giving a more accurate shot and saving brass by not causing it to be overworked. -Once the brass has been sized and set the brass in the gage and set the gage on a flat surface with the head side facing down. Now look across the top of the gage and this give the maximum and minimum for trim length.
0 | Total: $0.00 |