FILTERS
 

Bullet Molds & Accessories at LG Outdoors

 
Large, deep pot holds approximately 10 pounds of lead. Melt time is less than 20 minutes.

Lee Precision Production Pot IV 110V Melter 90009


Large, deep pot holds approximately 10 pounds of lead. Melt time is less than 20 minutes.

FLAT SHIPPING!
PRICE $78.25
QTY
ADD TO CART
Total qty available: 48
Lee's Reloading 2 Cavity Bullet Mold .45 Caliber (.450" Diameter), 200 Grains,

Lee's Reloading 2 Cavity Bullet Mold .45 Caliber (.450" Diameter), 200 Grains,


Lee's Reloading 2 Cavity Bullet Mold .45 Caliber (.450" Diameter), 200 Grains,

FLAT SHIPPING!
PRICE $54.24
QTY
ADD TO CART
Total qty available: 50
Manufacturer: Lee Mfg Number: 90486Series: 00 Buck Shot 18

Lee 90486 Mold Bullet 2 Piece 12 Gauge 00 Buck Shot


Manufacturer: Lee Mfg Number: 90486Series: 00 Buck Shot 18

FLAT SHIPPING!
PRICE $54.94
QTY
ADD TO CART
5% OFF!
MSRP: $57.95
Total qty available: 13
Lee Liquid alox gives Better Accuracy Because It eliminates leading And coats The Entire Bullet Just Like a Thin Jacket. Easy To Apply And eliminates The Need For Sizing Of Most Cast Bullets. While It...

Lee 90177 Liquid Alox Bullet Lubricant 1 Each Universal


Lee Liquid alox gives Better Accuracy Because It eliminates leading And coats The Entire Bullet Just Like a Thin Jacket. Easy To Apply And eliminates The Need For Sizing Of Most Cast Bullets. While It...

FLAT SHIPPING!
PRICE $12.24
QTY
ADD TO CART
5% OFF!
MSRP: $12.95
Total qty available: 14
Lee's Precision Melter Is a High Speed Melter With An Infinite Heat Control For The Serious Shooter. It Can Easily Handles 4 Cavity molds And Takes Less Than 15 minutes To Melt 4 pounds Of Metal And i...

Lee 110 Volt Electric Melter Md: 90021


Lee's Precision Melter Is a High Speed Melter With An Infinite Heat Control For The Serious Shooter. It Can Easily Handles 4 Cavity molds And Takes Less Than 15 minutes To Melt 4 pounds Of Metal And i...

FLAT SHIPPING!
PRICE $53.07
QTY
ADD TO CART
5% OFF!
MSRP: $55.95
Total qty available: 13
000 Buckshot Precision-machined Mold Produce 18 Linked Pellets Per Cast. .360 Diameter, 70 Grains Weight. Each Cast Produces Enough Pellets To Load Two 12 Gauge shotshells. Easily Cast 3,000 Pellets P...

Lee Mold Dc 000 Buck Shot With Holder 12 Gauge 70 Grains 90192


000 Buckshot Precision-machined Mold Produce 18 Linked Pellets Per Cast. .360 Diameter, 70 Grains Weight. Each Cast Produces Enough Pellets To Load Two 12 Gauge shotshells. Easily Cast 3,000 Pellets P...

FLAT SHIPPING!
PRICE $55.58
QTY
ADD TO CART
6% OFF!
MSRP: $58.95
Total qty available: 45
Lee's Precision Steel Mold Handles Fit Not Only The Lee Six Cavity blocks, But Most Other brAnds Of One And Two Cavity Molds. Priced Low Enough So You Can Have a Set For Every Pair Of blocks.

Lee 90005 Bullet Mold w/ Handles One Pair All 1, 2 or 6 Cavity Molds


Lee's Precision Steel Mold Handles Fit Not Only The Lee Six Cavity blocks, But Most Other brAnds Of One And Two Cavity Molds. Priced Low Enough So You Can Have a Set For Every Pair Of blocks.

FLAT SHIPPING!
PRICE $23.00
QTY
ADD TO CART
8% OFF!
MSRP: $24.95
Total qty available: 50
If You Cast Your Own Bullets, Our Crimp-On Gas Checks Will Enhance Their Performance. During Sizing, The Gas Check crimps To The Base Of Case Lead Bullets To Seal gasses And Protect The Base From defo...

Hornady 7110 Crimp-On Gas Checks For 35 Cal 1000 Per Box


If You Cast Your Own Bullets, Our Crimp-On Gas Checks Will Enhance Their Performance. During Sizing, The Gas Check crimps To The Base Of Case Lead Bullets To Seal gasses And Protect The Base From defo...

FLAT SHIPPING!
PRICE $39.51
QTY
ADD TO CART
22% OFF!
MSRP: $50.45
Total qty available: 25
#4 Buckshot Precision-machined Mold Produce 18 Linked Pellets Per Cast. .240 Diameter, 21 Grains. Each Cast Produces Enough Pellets To Load Two 12 Gauge Shotshells. Easily Cast 3,000 Pellets Per Hour....

Lee Mold 1 Buck Shot #4 90028


#4 Buckshot Precision-machined Mold Produce 18 Linked Pellets Per Cast. .240 Diameter, 21 Grains. Each Cast Produces Enough Pellets To Load Two 12 Gauge Shotshells. Easily Cast 3,000 Pellets Per Hour....

FLAT SHIPPING!
PRICE $54.94
QTY
ADD TO CART
5% OFF!
MSRP: $57.95
Total qty available: 6
Lee Six Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bullet suitable for .22 cal cartridges. Handles sold separately

Lee 90459 Mold 6 Cavity 1 . 55GR. .155 Diameter


Lee Six Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bullet suitable for .22 cal cartridges. Handles sold separately

FLAT SHIPPING!
PRICE $48.76
QTY
ADD TO CART
6% OFF!
MSRP: $51.95
Total qty available: 9
The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

Lee 90046 New Lube & Size Kit .356 Diameter Sizer Die/Punch/Case 7/8"x14 Threads


The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

FLAT SHIPPING!
PRICE $21.10
QTY
ADD TO CART
 
 
 
 
 
(1)
19% OFF!
MSRP: $25.95
Total qty available: 26
Round Ball molds With Double Cavity And Handles Have a Tangential Cut Off Which eliminates The objectional Nib at The Sprue. All molds For Pistol Calibers Are Double Cavity To Speed Casting.

Lee .454 Double Cavity Round Ball Mold W/Handle Md: 90442


Round Ball molds With Double Cavity And Handles Have a Tangential Cut Off Which eliminates The objectional Nib at The Sprue. All molds For Pistol Calibers Are Double Cavity To Speed Casting.

FLAT SHIPPING!
PRICE $36.02
QTY
ADD TO CART
5% OFF!
MSRP: $37.95
Total qty available: 40
The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

Lee 90055 New Lube & Size Kit .452 Diameter Sizer Die/Punch/Case 7/8"x14 Threads


The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

FLAT SHIPPING!
PRICE $21.10
QTY
ADD TO CART
22% OFF!
MSRP: $26.95
Total qty available: 50
Lee's Precision Slug Mold featuRes Self Centering Automatic Core pins For Maximum Speed And Convenience. The Mold Is Complete With Sprue Plate, Handles And Complete instructions With suggested Loads. ...

Lee 90281 Shotgun Slug Mold 12 ga 1oz Single Cavity w/Handle


Lee's Precision Slug Mold featuRes Self Centering Automatic Core pins For Maximum Speed And Convenience. The Mold Is Complete With Sprue Plate, Handles And Complete instructions With suggested Loads. ...

FLAT SHIPPING!
PRICE $41.81
QTY
ADD TO CART
5% OFF!
MSRP: $43.95
Total qty available: 42
Lee Double Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bullet suitable for .22 cal cartridges. Handles included.

Lee 90451 Mold Double Cavity C225-55 -RF


Lee Double Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bullet suitable for .22 cal cartridges. Handles included.

FLAT SHIPPING!
PRICE $35.24
QTY
ADD TO CART
10% OFF!
MSRP: $38.95
Total qty available: 27
The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

Lee 90037 New Lube & Size Kit .308 Diameter Sizer Die/Punch/Case 7/8"x14 Threads


The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

FLAT SHIPPING!
PRICE $21.10
QTY
ADD TO CART
18% OFF!
MSRP: $25.74
Total qty available: 42
The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

Lee 90036 New Lube & Size Kit .225 Diameter Sizer Die/Punch/Case 7/8"x14 Threads


The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

FLAT SHIPPING!
PRICE $21.10
QTY
ADD TO CART
12% OFF!
MSRP: $23.99
Total qty available: 43
Large 4" Diameter Pot Allows Easy Access For The Ladle Caster. Same High Efficiency Design That Has Made Lee Pots The Most Popular. Melt Time Is Less Than 20 minutes With Just watts. 20-Lb. Capacity F...

Lee 110 Volt Electric Melter Md: 90949


Large 4" Diameter Pot Allows Easy Access For The Ladle Caster. Same High Efficiency Design That Has Made Lee Pots The Most Popular. Melt Time Is Less Than 20 minutes With Just watts. 20-Lb. Capacity F...

FLAT SHIPPING!
PRICE $76.54
QTY
ADD TO CART
Total qty available: 18
Lee Six Cavity Bullet Mold produces a .312 diameter 155 grain round nose bullet suitable for cartridges like 7.62 x 39.  Handles sold separately

Lee 90741 Mold 6 Cavity 1 7.62x39mm Rifle 155 GR. .268 Diameter


Lee Six Cavity Bullet Mold produces a .312 diameter 155 grain round nose bullet suitable for cartridges like 7.62 x 39. Handles sold separately

FLAT SHIPPING!
PRICE $48.76
QTY
ADD TO CART
6% OFF!
MSRP: $51.95
Total qty available: 30
Round Ball molds With Double Cavity And Handles Have a Tangential Cut Off Which eliminates The objectional Nib at The Sprue. All molds For Pistol Calibers Are Double Cavity To Speed Casting.

Lee .451 Double Cavity Round Ball Mold With Handle Md: 90440


Round Ball molds With Double Cavity And Handles Have a Tangential Cut Off Which eliminates The objectional Nib at The Sprue. All molds For Pistol Calibers Are Double Cavity To Speed Casting.

FLAT SHIPPING!
PRICE $36.02
QTY
ADD TO CART
5% OFF!
MSRP: $37.95
Total qty available: 50
Round Ball molds With Double Cavity And Handles Have a Tangential Cut Off Which eliminates The objectional Nib at The Sprue. All molds For Pistol Calibers Are Double Cavity To Speed Casting.

Lee .490 Double Cavity Round Ball Mold With Handles Md: 90448


Round Ball molds With Double Cavity And Handles Have a Tangential Cut Off Which eliminates The objectional Nib at The Sprue. All molds For Pistol Calibers Are Double Cavity To Speed Casting.

FLAT SHIPPING!
PRICE $36.02
QTY
ADD TO CART
5% OFF!
MSRP: $37.95
Total qty available: 25
The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

Lee 90047 New Lube & Size Kit .357 Diameter Sizer Die/Punch/Case 7/8"x14 Threads


The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

FLAT SHIPPING!
PRICE $21.10
QTY
ADD TO CART
25% OFF!
MSRP: $27.95
Total qty available: 24
The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

Lee 90049 New Lube & Size Kit .224 Diameter Sizer Die/Punch/Case 7/8"x14 Threads


The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

FLAT SHIPPING!
PRICE $21.10
QTY
ADD TO CART
11% OFF!
MSRP: $23.75
Total qty available: 17
The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

Lee 90060 New Lube & Size Kit .401 Diameter Sizer Die/Punch/Case 7/8"x14 Threads


The fastest And easiest Way To Lubricate And Size Cast Bullets Is By using Lee's Bullet Sizing Kit. Standard 7/8 X 14 Threads Will Fit Any Reloading Press. Bullets Are pushed Through The Sizing Die No...

FLAT SHIPPING!
PRICE $21.10
QTY
ADD TO CART
27% OFF!
MSRP: $28.95
Total qty available: 12
Lee Double Cavity Mold produces a .375 Diameter Ball, 79.16 grains. Includes Handles See More Details

Lee 2-Cavity Round Ball 375" Diameter Bullet Mold for Colt Navy 36 caliber cap and revolvers.


Lee Double Cavity Mold produces a .375 Diameter Ball, 79.16 grains. Includes Handles See More Details

FLAT SHIPPING!
PRICE $36.02
QTY
ADD TO CART
5% OFF!
MSRP: $37.95
Total qty available: 15
 
 
 
 
 
 
 
 
 
 
of  Pages
SORT BY:
POPULARITY
3458 PRODUCTS SHOWN
FILTERED BY:
CATEGORY: Reloading Bullet Molds & Accessories
 
 
 

OK

Loading...
CREATE AN ACCOUNT
X

PASSWORD REQUIREMENTS

The password you choose must meet the following requirements:

Your password must be at least twelve characters long,

— OR —

Your password must be at least seven characters long
AND contain at least one numeric character
AND contain at least one upper case character
AND contain at least one lower case character
AND contain at least one of the below special characters
     !\^$.|?*(){}[]-/#%&\'):;<>=@_`~


Note: If the password you chose includes your first name, last name or email domain those values will be ignored when determining the password length.